Standard nuts | Rhombus nuts

Rhombus nuts

A variety of executions from one single source

We offer to our customers rhombus nuts for the aluminium profile technology in different versions and with different surface coatings. Because of the thread sizes of M 2,5 to M12 (1/8" to 5/16"), a material width of 5,00 to 40,00 mm and a material strength of 1,30 to 8,00 mm, the user is offered different application possibilities in many different sectors.

According to the requirement you receive our rhombus nuts in the materials steel, stainless steel or brass. In our company the nuts are produced in flat or alternatively in profiled execution. The connection elements can be delivered surface-coated in various forms or also, if desired, blank.

Concerning the rhombus nuts the surface finishing has a decisive importance. In the finishing we offer you galvanic coatings, thermal galvanizations (TZN), and zinc flake coatings. Special surface treatments are possible on request.

Application possibilities in practice

Rhombus nuts can be inserted from above or can be slid in at the profile end. By means of a screw they are twisted and thus connect firmly to the profile. Rhombus nuts of Vöhrs are used in the aluminium profile technology. . Because of the fact that these profiles are used in many different sectors, the rhombus nuts can be used in a variety of ways.

Thus the rhombus nuts play an important role in the automation technology. In the building construction they are used as shutter profiles and shutter guide rails. In the automotive industry aluminium profiles are for example processed to complete truck front modules or door modules and to decorative trunk rails. Also in the logistics aluminium profiles are required as storage platforms. Moreover rhombus nuts are used in the assembly technology, the solar industry, the switch cabinet construction or also in the sanitary technology.

Enquiry rhombus nuts without radii
Enquiry rhombus nuts with radii

Rhombus nuts | Technical data

Thread:
M2,5-M12, 1/8"-5/16"
Lengths: 10,00-over 200,00mm
Material widths: 5,00-40,00mm
Material strenghts: 1,30-8,00mm
Materials: steel, stainless steel, brass, in flat or profiled execution
Surfaces: blank, all galvanic coatings, thermally galvanized (TZN), zinc flake coating, further surface treatments on request

Enquiry rhombus nuts without radii
Enquiry rhombus nuts with radii

Contact data

Vöhrs GmbH & Co. KG
Neuebrücke 1
D-58566 Kierspe

Fon: +49 23 59 . 70 11
Fax: +49 23 59 . 29 13 31

E-Mail: Diese E-Mail-Adresse ist gegen Spambots geschützt! JavaScript muss aktiviert werden, damit sie angezeigt werden kann.